Category: Information


I previously wrote a guide detailing how to offload decoding of h264 and x264 video files to the graphics card. That guide is very outdated now, but still relevant. I therefore decided to give you an updated version that also takes Windows XP users into account and simplifies the whole process.

Changes from previous version

  • Uses a newer and better Media Player Classic Home Cinema (MPC-HC)
  • Accounts for Windows XP users
  • Does not require Cyberlink video decoder, which should save you some money as well as simplifying the setup

This 3 step tutorial is based on following links:

Step 1 – Requirements and installation

Latest Media Player Classic Home Cinema (MPC-HC):

A supported Operating System: Windows XP SP3 or Windows Vista/7 32bit/64bit

Step 2 – Configuration

After installing MPC-HC, fire it up and open the options by going to View > Options.

Make sure the settings are as described in the screenshots below:

MPC-HC Playback Options
MPC-HC Output Options
MPC-HC Filter Options

Step 3 – Testing

With the correct settings in place, it is time to check that Hardware Decoding is actually functioning.

To do this you will en a test file, you can get one from the following address:

Start the movie, then right-click and go to Filters > MPC Video Decoder as shown below.

Renderer Information

In the properties window it should display the following under DXVA settings, if it says Not Using DXVA, then look trough the troubleshooting points at the end of this tutorial.
DXVA Enabled


Problem: MPC Video Decoder Properties says Not Using DXVA under DXVA mode with the Aristocats.mkv test film.

Solution: If you configured MPC HC exactly as noted in this tutorial, then you should make absolutely sure your graphics card supports x264 hardware decoding.

Problem: MPC Video Decoder Properties says Not Using DXVA under DXVA mode on some films other than the Aristocats.mkv test film.

Solution: First make sure the video format in use is actually encoded in h264/x264. If it is in h264/x264 you might be unlucky as not all encodes properly support hardware decoding and DXVA (especially older files). Click here for more info.


I just found a cheap wireless adapter for Backtrack

Since I’m currently writing a master report on WEP (which should be gone by now, but isn’t) I figuered I might aswell try out the attacks described from the souces I use. Experimenting with this types of attacks is best done with aircrack-ng and I knew BackTrack Linux comes with this, aswell as a range of other useful tools, but the problem remains.

None of my current wireless chipsets are compatible with packet injection and to top this hop, hunting after a compatible wifi adapter that won’t make to much a dent in my wallet is quite the chore. Especially since manufacturers has different revisions on their adapters, meaning the same model of an adapter might not be compatible since it is revision 2 and not the first or third revision which are the one compatible (uses on of the aircrack-ng compatible wifi chipset).

But as luck would have it I happen to come across this adapter. Not only is it under $22, but a BackTrack VMware image is included on the driver CD! It even has a B3/B4 logo on the package to signify that it is compatible with both BackTrack 3 and the newer BackTrack 4.

I already ordered this adapter and it should arrive in the post soon. I will see if I can offer any more info on how well it works as soon as I have tested it out.


Olive is the codename for JunOS running on a regular PC instead of a Juniper router. In this tutorial I will cover the installation of Olive in a VMware virtual machine. Using a virtual machine, abbreviated VM, makes it easy to implement a Juniper device to a virtual network. This is great for both learning and testing. I recommend using GNS3 for experimenting with virtual networks, this program also enables the use of virtual Cisco IOS appliances.

Note for Qemu (a VMware alternative) and Linux users: While this tutorial is meant for VMware users running Windows, there are two things you can learn from it. Firstly, set the VM’s memory capacity to 512 MB, this will prevent errors where the installer runs out of temporary space. Secondly, get the JunOS signature removal script (both Windows and Linux compatible) linked to under Requirements. Follow the included Read Me. Then transfer the modified file to the FreeBSD/Olive VM and jump straight to the pkg install part. The script automates the most tedious step and saves time and effort 🙂

This tutorial i based on:

I have added som tweaks to simplify the install and some troubleshooting tips for problems that might occur with recent JunOS versions. Some text might be similiar to the sources as I see no point in reeinventing the wheel 🙂

My specs:

VMware 7.1 and Windows XP SP3.


JunOS 10 or higher (can be gotten from torrent-sites)

FreeBSD 4.11

JunOS signature removal script (junos-auto-unprotect-v0.2 (Linux Win).zip by tranzitwww)

Quick ’n Easy FTP Server – To transfer JunOS over to the FreeBSD installation. If you already have an ftp-server, you can just use that.


Step 1: Setting up VMware

Choose the following menu options

  • New Virtual Machine (VM)
  • Typical install
  • I will install the OS later
  • Other, then FreeBSD in dropdown menu
  • Choose a name (I used JunOS Olive) and install location
  • 4 GB, Single file
  • Click Customize Hardware:
    • Set memory to 512 MB
    • Set the network adapter to bridged mode
    • Set the CD/DVD to use an .iso image and specify the FreeBSD install iso you downloaded
  • Finish (Don’t start the VM yet)

Before we install FreeBSD we will tweak the VMware image a bit. Do the following:

  1. Locate the folder with the VMware image you just created
  2. Find the file ending with .vmx and open it in notepad
  3. Then change scsi0.present = “TRUE”  to scsi0.present = “FALSE”
  4. Save the file and go back to vmware.

Step 2: Installing FreeBSD

  • Start the VM
  • Skip the kernel configuration
  • Select the Express install option, you will now be taken to the partition setup
  • Within fdisk, press A to allocate entire disk for bsd, then press Q to finish
  • Select: install a standard MBR
  • Create partition (with C) :
    • 512M for /
    • 1024M for swap partition
    • 128M for /config
    • The rest for /var (this should be around 2400 MB)

  • Press Q again to complete partition setup
  • Choose installation type User and select No for FreeBSD ports
  • X to Exit the menu and install from CD/DVD
  • Wait…
  • Select Yes for chance to set any last options
  • Choose Root Password and type the password you want
  • Now you can select X to Exit. It will now reboot
  • Wait 5 sec and power off the VM and unmount the DVD by setting the virtual CD/DVD drive to use a physical device

Step 3: Prepare JunOS and setup FTP server

  1. Unpack the JunOS signature removal script
  2. Then find the JunOS install package (usually called jinstall-9.6R1.13-export-signed.tgz or similar based the version you have) and put it in the same folder (Windows) as the batch script
  3. Run the script (might need to run as admin on windows vista/7) and select the source .tgz file by typing the name of the jinstall (type ji and click tab to save time)
  4. The script will modify the install and create a new file with a name ending in olive. This is the file you want to tranfer and use in your FreeBSD VM

Now you should install and start the FTP server program.

  1. Click Launch User Account Wizard and set a name and password
  2. Then find the directory of the jinstall-olive image and set it as Home Directory
  3. Make sure the account has at least download priveliges
  4. Click the start button from the toolbar

Step 4: Transfer and install JunOS in your VM

Start the VM and login with root as username and the password you assigned. Now we want to retrieve the install over ftp so type the following commands:

ifconfig em0 <ip-address you want to assign the FreeBSD VM> e.g., this should be in the same network as the ftp-server

cd /var/tmp

ftp <ftp-server ip-addresse.g. ftp

username: <username>

password: <password>


get <jinstall-filenamee.g. get jinstall-7.2R2.4-domestic-signed.tgz


At this point i recommend doing a snapshow of the VM. Go to the VM-menu, choose Snapshot and click Take Snapshot…


Now we will launch the JunOS install by executing the following command:

pkg_add -f /var/tmp/<jinstall-filename> e.g. get jinstall-7.2R2.4-domestic-signed.tgz

When complete you should choose not to reboot, we want to edit one last file so we can monitor the installation progress after reboot.


ee /boot/loader.conf

Find the line console=”comconsole” and set it to console=”vidconsole”

Press escape and leave editor. Remember to save 😉

This is a good moment to do a second snapshot.

Now reboot by typing reboot


FAQ: JunOS Olive Troubleshooting

All these questions have been addressed in this tutorial.

Q: During installation i get the following error:

WARNING: The /tmp/preinstall filesystem is low on free space.
WARNING: This package requires 265926k free, but there
WARNING: is only 208518k available.

WARNING: This installation attempt will be aborted. You are now
WARNING: in a debug shell. Type ^D to reboot the system
You are now in a debugging subshell (you may not see a prompt)…

A: Increase the memory of the virtual machine. The installer uses RAM memory for swap space and will fail if there is too little space available.

Q: During installation i get the following error:

ad0: 32768MB <vmware Virtual IDE Hard Drive 00000001> at ata0-master UDMA33

A: The simple fix for this is to edit the appropriate VMware configuration file ( whatever.vmx ) and change the line that reads scsi0.present = “TRUE” to scsi0.present = “FALSE”